Category: engineering (Page 1 of 2)

What a cake has in common with metal 3D printing

9. June 2022 / Hanna / 0 Comments

by Maylin Homfeldt, translated by Niko Steiner

Fig.1: On the left is a layered cake, in the middle is a metal component from 3D printing and on the right is Selective Laser Melting (3D printing process). © M. Homfeldt

Pastry chefs use a very similar method to 3D printers – they make their cakes in layers. In doing so, they encounter problems that also arise in metal 3D printing – the layers must be uniform to produce a beautifully shaped cake or a dimensionally accurate component. There are new findings from the science confectionery about how to achieve the uniformity of the layers in metal 3D printing.

Houston, the fuel is sloshing…

7. April 2022 / Hanna / 0 Comments

by Julius Bihler, translated by Niko Steiner

Figure 1: During a rocket launch, vibrations occur in the fuel tank that can even influence the flight path. © Pixabay

Space rockets are rigid giants that overcome the Earth’s gravity with unimaginable force and reach outer space. But are they really as rigid as they look from afar? You have probably never sat IN a rocket to be able to judge that from close up. This article takes you to the inside of a rocket and what goes on there.

Solving food challenges on Earth by using technologies for human space exploration

20. January 2022 / Hanna / 0 Comments

by Alwyn Saju

Figure 1: Patiently waiting for food aid in Bamako, Mali, photo: Derek Markwell/DFID.

Long wait for food, shortage of fresh food and water scarcity. These are some of the common problems faced by the displaced people living in refugee camps. Same is the case in relief camps set in places hit by natural calamities like flood, earthquake, drought etc. The previous article was about “Controlled Environment Agriculture”. In this article, you will read about an interesting project called “MEPA” which intends to solve food challenges on earth, especially in refugee camps using CEA technologies.

Controlled Environment Agriculture – or how to do “farming” in space

13. January 2022 / Hanna / 0 Comments

by Alwyn Saju

Figure 1: Colonization of Mars, credit: D Mitriy (CC BY-SA 3.0) via Wikimedia Commons.

A scenario shown in the above figure is too challenging to be realised. In future human space exploration missions, our astronauts will face many food challenges when visiting exotic places like the Moon and Mars. Luckily, space engineers and scientists are working on technologies to solve the challenge of growing fresh food in space. In this article you will read about such technologies and understand how farming in space will be really done.

Melodious Sounds From a 3D Printer

28. November 2021 / Vivienne / 0 Comments

by Inga Meyenborg, translated by Greta Sondej

Anyone can print out a photo of a whistle at home with a classic inkjet printer. But no sounds can be elicited from this image. That is left to one’s own imagination. To create a three-dimensional, functional product, a different printing process is needed.

Even those who do not follow on engineering and manufacturing techniques have probably heard or read something about “3D printing”. But what exactly does “3D printing” mean?

3, 2, 1, … Ready for Take-Off!

28. November 2021 / Greta / 0 Comments

Launch Campaign in Esrange as the Highlight of the REXUS/BEXUS Programme

by Greta Sondej and Christoph Kulmann

“There is no comfortable path that leads from the earth to the stars”, this was already known by the Roman philosopher and naturalist Lucius Annaeus Seneca (ca. 4 BC – 65 AD), also known as Seneca the Younger.

For our journey to the stars, we have been working towards this event for almost two years with our FORAREX project: The Launch Campaign at the European Space and Sounding Rocket Range (Esrange) at the civilian balloon and rocket launch site near Kiruna in northern Sweden. It is the highlight of the German-Swedish student programme REXUS/BEXUS, which we have already presented here on the Science Blog.

Kiruna – All Fired up for an Icy Adventure

28. November 2021 / Greta / 1 Comment

by Christoph Kulmann and Greta Sondej

Long anticipated and eagerly awaited, our student training week starts in snowy Lapland near Sweden’s northernmost city: Kiruna (from the North Sami “giron”, meaning “snow grouse”).

Bremen Airport is already getting us in the mood for the weather that awaits us in Lapland…

REXUS/BEXUS – Experiments Soar Into Space!

28. November 2021 / Greta / 0 Comments

An European Education Programme Empowers Students to Develop Their own Space Mission

by Greta Sondej and Christoph Kulmann

In our last article, we told you about our FORAREX project, which we developed within the framework of the German-Swedish REXUS/BEXUS programme.

But what exactly does this REXUS/BEXUS programme entail? And who can participate?

FORAREX – Astronaut in Miniature Form

28. November 2021 / Greta / 0 Comments

How a Single-Celled Organism Finds its Way From the Sea Into Outer Space

by Team FORAREX

Imagine you are living under the sea. You see the suns rays shining through the water. There is sand beneath you. The water flows around you to the rhythm of the wave – and you sway with it (see Fig. 1). Everything feels very pleasant. You are thinking how wonderful your home is. The waves, the light – everything is perfect.

But suddenly a dark shadow looms over you – and this shadow takes you out of this paradise and catapults you into space! Isn’t that a disturbing and rather improbable idea?

But that is in fact my story.

Foraminifera – A Hard Shell With a Soft Core

28. November 2021 / Greta / 0 Comments

by Christoph Kulmann and Greta Sondej

Foraminifera (Latin for “hole bearers”, informally called “forams”) are single-celled organisms that usually have a multi-chambered shell, which can be built in various ways depending on the species. They are the stars of the FORAREX (FORAminifera Rocket EXperiment) project, in which we investigate their behaviour and shell growth under microgravitational conditions.

Category: engineering (Page 1 of 2)

What a cake has in common with metal 3D printing

Houston, the fuel is sloshing…

Solving food challenges on Earth by using technologies for human space exploration

Controlled Environment Agriculture – or how to do “farming” in space

Melodious Sounds From a 3D Printer

3, 2, 1, … Ready for Take-Off!

Launch Campaign in Esrange as the Highlight of the REXUS/BEXUS Programme

Kiruna – All Fired up for an Icy Adventure

REXUS/BEXUS – Experiments Soar Into Space!

FORAREX – Astronaut in Miniature Form

How a Single-Celled Organism Finds its Way From the Sea Into Outer Space

Foraminifera – A Hard Shell With a Soft Core

Recent Posts

Recent Comments

Archiv

Meta